The Eisele vertical pumps master the most difficult tasks with ease, inspire with their reliability and stir and convey up to 10,000 l / min. They are available in lengths from 1.50 m to 5.50 m.
Power range: from 11.0 kW to 55.0 kW.

Furnishing:

Different auger blades depending on the performance
Solid pump housing made of gray cast iron
Pipeline components, rods and protective tube (V42) made of stainless steel
Protective frame V41 in painted steel, optionally in stainless steel
Particularly wear-resistant mechanical seal

The numerous accessory components enable a wide range of installation and application options. The GTWS range covers a wide range of applications with a compact design.

Power range: from 2.2 kW to 22.0 kW.

Furnishing:
Three-phase motor with built-in thermal contacts
Sealing probe in the oil chamber, control lamp on the switch / control
Stainless steel slide
Propellers in different versions
Electric cable 8m (optional 10m, 14m, 18m)

Leistungsdaten:

−− Durchsatz: 8–15 m³/h

−− Drehzahlbereich: 10–38 U/min

−− elektrische Motorleistung:

5,5 kW/400 V

Effiziente Entwässerung

von flüssigen Reststoffen aus

−− landwirtschaftlichen Betrieben

−− Biogasanlagen

−− kommunalen Kläranlagen

−− Industriebetrieben

−− Lebensmittelindustrie

−− Brennereien

Ausführung:

−− alle produktführenden Teile sind aus Edelstahl 1.4301 gefertigt

−− leistungsstarke und effiziente Antriebseinheit von Getriebebau NORD GmbH & Co. KG

−− Pressschnecken mit hochverschleißfester Panzerung (ca. 70 HRC) in verschiedenen Ausführungen

−− sehr wartungsfreundliche Abdichtung und Lagerung mit Lincoln Zentralschmierpumpe

−− Seiherkörbe mit speziellem, optimiertem Verschleißprofil in unterschiedlichen Spaltmaßen (0,25 mm, 0,5 mm, 0,75 mm, 1 mm)

The electrically driven Eisele submersible motor pumps AT are available in mobile (ATF, GTF) or stationary (AT) versions. The stationary versions can be installed both wet and dry.

Power range: from 3.0 kW to 22.0 kW.

Capacity range: from 2,300 l/min to 6,700 l/min

Features

· Overloadable motors

· Auger blades

· Open impeller

· Vortex impeller

· Transport lug

· Sealing sensor

· Built-in thermal contacts

· Electric cable (standard 8 m)

The self-priming Eisele rotary lobe pumps from the DK series are available with power-take-off shafts or electric drives. Available are four models with a performance of up to 6,000 l/min and an operating pressure of up to 10 bar. Extensive accessories expand the wide range of applications

Power range: from 7.5 kW to 63.0 kW.

Capacity range: from 600 l/min to 6,000 l/min

Features

· Wearing plates on the front face in the pump housing and cover

· Suction and pressure side with outlet nozzle flange

· Suction and pressure side both with male connector connecting piece

· Pressure gauge on pressure side

· Sight glass on suction side

· 2" drain opening in pipe elbow

With the modular Eisele drum filling station FFS (pipe diameters DN150 and DN200), even large drum trolleys can be filled ffectively and flexibly.

Thanks to a joint with a rubber sleeve, the FFS is hydraulically height-adjustable and can be operated with the tractor hydraulics, a hand pump or a remote-control unit. A telescopic outlet with a pulley or a rigid variant with a hose outlet without height adjustment are available optionally. In combination with the Eisele high-performance pumps, your drum filling station becomes a perfect unit.